Sony Clock Radio C707 User Manual

4-180-721-14(1)  
Allow adequate air circulation to prevent  
internal heat build-up. Do not place the unit  
on a thick pile surface (rug, a blanket, etc.),  
or near materials that might block the  
ventilation holes (such as a curtain, etc.).  
Should any solid object or liquid fall into the  
unit, unplug the unit and have it checked by  
qualified personnel before operating it any  
further.  
To clean the casing, use a soft cloth  
dampened with a mild detergent solution.  
Never touch the wire of the external FM  
antenna during a thunderstorm.  
Furthermore, immediately disconnect the  
main plug from the wall outlet.  
For customers who purchased this product in  
the USA  
Important Safety  
Instructions  
Connecting the  
antenna  
About the backup  
battery  
Please register this product on line at  
Proper registration will enable us to send  
you periodic mailings about new products,  
services, and other important announcements.  
Registering your product will also allow us  
to contact you in the unlikely event that the  
product needs adjustment or modification.  
ank you.  
1) Read these instructions.  
2) Keep these instructions.  
To maintain accurate time, this unit includes an  
internal CR2032 battery as a backup power  
source in the event of a power interruption.  
3) Heed all warnings.  
To connect the AM loop  
antenna  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
FM/AM Clock Radio  
The shape and the length of the antenna is  
designed to receive AM signals. Do not  
dismantle or roll up the antenna.  
Knowing when to replace  
the battery  
7) Do not block any ventilation openings.  
Install in accordance with the  
Operating Instructions  
WARNING  
To reduce the risk of fire or electric shock,  
do not expose this apparatus to rain or  
moisture.  
To reduce the risk of fire, do not cover the  
ventilation of the apparatus with newspapers,  
tablecloths, curtains, etc. And do not place  
lighted candles on the apparatus.  
To reduce the risk of fire or electric shock, do  
not expose this apparatus to dripping or  
splashing, and do not place objects filled with  
liquids, such as vases, on the apparatus.  
When the battery becomes weak, “” will  
appear in the display.  
manufacturer’s instructions.  
1 Remove only the loop part from the  
plastic stand.  
2 Set up the AM loop antenna.  
ICF-C707  
8) Do not install near any heat sources such as  
radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that  
produce heat.  
If a power interruption occurs while the battery  
is weak, the current time and alarm will be  
initialized.  
Dream Machine is a trademark of Sony Corporation.  
NOTES ON THE LITHIUM BATTERY  
Replace the battery with a Sony CR2032 lithium  
battery. Use of another battery may cause a fire  
or explosion.  
9) Do not defeat the safety purpose of the  
polarized or grounding-type plug. A  
polarized plug has two blades with one  
wider than the other. A grounding type plug  
has two blades and a third grounding prong.  
The wide blade or the third prong are  
provided for your safety. If the provided  
plug does not fit into your outlet, consult an  
electrician for replacement of the obsolete  
outlet.  
10)Protect the power cord from being walked  
on or pinched particularly at plugs,  
convenience receptacles, and the point  
where they exit from the apparatus.  
11)Only use attachments/accessories specified  
by the manufacturer.  
Wipe the battery with a dry cloth to assure a  
good contact.  
Be sure to observe the correct polarity when  
installing the battery.  
Note  
If AM 12:00” flashes in the display when the  
unit is connected to an AC outlet for the first  
time, the battery may be weak. In this case,  
consult your Sony dealer.  
Do not hold the battery with metallic  
tweezers, otherwise a short-circuit may  
occur.  
No Power No Problem is a trademark of Sony Corporation.  
3 Connect the cords to the AM antenna  
©2010 Sony Corporation  
Printed in China  
terminals.  
Do not install the appliance in a confined space,  
such as a bookcase or built-in cabinet.  
If you have any questions or problems  
concerning your unit, consult your nearest  
Sony dealer.  
Cord (A) or cord (B) can be connected  
either way round.  
Insert the cord while  
pushing down the  
terminal clamp.  
Installing and replacing the  
backup battery  
1 Keep the AC plug connected to the AC  
outlet, and pry out the battery holder at  
the bottom of the unit using a slender  
rod, such as a screwdriver. (See fig. -  
)  
Do not expose the batteries (battery pack or  
batteries installed) to excessive heat such as  
sunshine, fire or the like for a long time.  
As the main plug is used to disconnect the unit  
from the mains, connect the unit to an easily  
accessible AC outlet. Should you notice an  
abnormality in the unit, disconnect the main  
plug from the AC outlet immediately.  
Troubleshooting  
Should any problem persist after you have  
made the following checks, consult your nearest  
Sony dealer.  
Only insert up  
12)Use only with the cart, stand, tripod,  
bracket, or table specified by the  
manufacturer, or sold with the apparatus.  
When a cart is used, use caution when  
moving the cart/apparatus combination to  
avoid injury from tip-over.  
to here.  
B
A
2 Insert a new battery in the battery  
The clock flashes AM 12:00due to a  
power interruption.  
The battery is low. Replace the battery.  
Remove the old battery and install a new one.  
The alarm settings do not sound at the  
preset alarm time.  
Check that alarm “” or alarm “” is  
properly set/displayed.  
The unit is not disconnected from the AC  
power source (mains) as long as it is connected  
to the wall outlet, even if the unit itself has been  
turned off.  
holder with the side facing up.  
To remove the battery from the battery  
compartment, push it out from the side  
marked PUSH. (See fig. -)  
4 Make sure the AM loop antenna is  
You are cautioned that any changes or  
modifications not expressly approved in this  
manual could void your authority to operate  
this equipment.  
3 Insert the battery compartment back  
connected firmly by pulling softly.  
into the unit. (See fig. -)  
13)Unplug this apparatus during lightning  
storms or when unused for long periods of  
time.  
4 When you are replacing the battery,  
press any of the following buttons:  
RADIO BAND, AUDIO IN, or  
NATURE SOUND / PRESET to turn  
” off in the display.  
Adjusting the AM loop antenna  
Find a place and an orientation that provides  
good reception.  
The alarm settings are activated but there  
is no sound at the preset alarm time.  
Check the alarm volume setting.  
The nameplate and important information  
concerning safety are located on the bottom  
exterior.  
14)Refer all servicing to qualified service  
personnel. Servicing is required when the  
apparatus has been damaged in any way,  
such as power-supply cord or plug is  
damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus  
has been exposed to rain or moisture, does  
not operate normally, or has been dropped.  
For the state of california, USA only  
Perchlorate Material –special handling may apply,  
perchlorate  
Perchlorate Material: Lithium battery contains  
perchlorate  
Do not place the AM loop antenna near the  
unit or other AV equipment, as noise may  
result.  
When daylight saving time begins, the  
clock does not employ the daylight saving  
time automatically.  
Make sure the clock is set correctly.  
Press and hold DISPLAY/CLOCK and  
SNOOZE / BRIGHTNESS simultaneously for  
at least 2 seconds to activate the Automatic  
DST function.  
WARNING  
Note  
Tip  
When you replace the battery, do not  
disconnect the AC plug from AC outlet.  
Otherwise, the 100 year calendar, current time,  
alarm and station presets will be initialized.  
Do not ingest battery, chemical hazard.  
Adjust the direction of the AM loop antenna for  
best AM broadcast sound.  
This product contains a coin/button cell battery.  
If the coin/button cell battery is swallowed, it  
can cause severe internal burns in just 2 hours  
and can lead to death.  
Keep new and used batteries away from  
children. If the battery compartment does not  
close securely, stop using the product and keep  
it away from children.  
Specifications  
Time display  
12-hour system  
Radio section  
Frequency range  
If you think batteries might have been  
swallowed or placed inside any part of the body,  
seek immediate medical attention.  
Features  
This graphical symbol is located on the bottom  
exterior.  
Dual alarm FM/AM synthesized clock radio  
Nature Sound (Sea Waves, Birds, Rain,  
Brook, Under the Sea)  
Temperature display (Fahrenheit /  
Centigrade) 5°F – 122°F (–15°C – 50°C)  
Built-in audio cable for Digital Music Player  
10 Station Presets (5 FM/5 AM)  
Various types of alarms - radio, buzzer and  
Nature Sounds (5)  
Band Frequency  
Channel step  
CAUTION  
Danger of explosion if battery is incorrectly  
replaced. Replace only with the same type.  
FM  
87.5 MHz – 108 MHz 0.1 MHz  
AM 530 kHz – 1 710 kHz  
10 kHz  
General  
Speaker  
NOTE  
Approx. 3.6 cm (1 7/16 inches) dia. 8 Ω  
This equipment has been tested and found to  
comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable  
protection against harmful interference in a  
residential installation. This equipment  
CR2032  
Automatic time set: when you plug the clock  
in for the first time, the current time will be  
shown in the display  
Input  
Built-in audio cable with stereo-mini plug  
(ø 3.5 mm)  
Power output  
0.7 W (at 10% harmonic distortion)  
Power requirements  
120 V AC, 60 Hz  
For clock back up: 3V DC, one CR2032 battery  
Nature Sound  
Sea Waves, Birds, Rain, Brook, Under the Sea  
Temperature range  
5 °F – 122 °F (–15 °C – 50 °C)  
Temperature resolution  
1 °F (1 °C)  
Dimensions  
Approx. 190 mm × 67 mm × 62 mm (w/h/d)  
(7 1/2 inches × 2 3/4 inches × 2 1/2 inches) not  
including projecting parts and controls  
Automatic Daylight Savings Time Set/  
Summer time adjustment  
generates, uses and can radiate radio frequency  
energy and, if not installed and used in  
100 year calendar and DATE/TIME ZONE  
button to display year, month and date  
Brightness Control (High/Low/Off)  
No Power No Problem alarm system to keep  
the clock and the alarm operating during a  
power interruption with a CR2032 battery  
installed  
Extendable Snooze system - Snooze time can  
be set from 10 to 60 minutes  
Progressive Alarm Speed (buzzer only)  
accordance with the instructions, may cause  
harmful interference to radio communications.  
However, there is no guarantee that interference  
will not occur in a particular installation. If this  
equipment does cause harmful interference to  
radio or television reception, which can be  
determined by turning the equipment off and  
on, the user is encouraged to try to correct the  
interference by one or more of the following  
measures:  
— Reorient or relocate the receiving antenna.  
— Increase the separation between the equipment  
and receiver.  
Precautions  
— Connect the equipment into an outlet on a  
circuit different from that to which the receiver  
is connected.  
Play the unit on the power source specified in  
“Specifications.”  
Mass  
Approx. 620 g (1 lb 5.87 oz) including power  
supply unit and CR2032 battery  
Supplied accessories  
AM loop antenna (1)  
To disconnect the power cord (mains lead),  
pull it out by the plug, not the cord.  
Since a strong magnet is used for the speaker,  
keep personal credit cards using magnetic  
coding or spring-wound watches away from  
the unit to prevent possible damage from the  
magnet.  
— Consult the dealer or an experienced radio/TV  
technician for help.  
WARNING  
Replace the battery for the clock backup with  
a Sony CR2032 lithium battery. Use of  
another battery may present a risk of fire or  
explosion.  
Design and specifications are subject to change  
without notice.  
Do not leave the unit in a location near a heat  
source such as a radiator or airduct, or in a  
place subject to direct sunlight, excessive  
dust, mechanical vibration, or shock.  
Battery may explode if mistreated. Do not  
recharge, disassemble or dispose of in fire.  
Dispose of the used battery promptly. Keep  
away from children.  
This unit includes a preinstalled Sony Lithium battery (CR2032) as back-up power source for the clock, which is preset  
to EST (Eastern Standard Time) at the factory. And this battery is considered part of the product.  
 

Sharp Convection Oven R 1870 User Manual
SMSC Network Card LAN9132 User Manual
Snapper Snow Blower LE317 User Manual
Sony Carrying Case LCM TRV9 User Manual
Sony Ericsson Cell Phone G502C User Manual
Sony Network Router BKS R1601 User Manual
StarTechcom Computer Drive IDE1810U2Z User Manual
Sunbeam Toaster 3916 User Manual
Sun Microsystems Server X6250 User Manual
Symbol Technologies Network Card MRC 921 User Manual