Shure Microphone RK279 User Manual

Model RK279 User Guide  
INSTRUMENT MOUNTING KIT FOR SM11 DYNAMIC LAVALIER MICROPHONE  
The Shure Model RK279 provides mounting accessories that en-  
able owners of Shure Model SM11 Omnidirectional Dynamic Lava-  
lier Microphones to use their microphone with a variety of acoustic  
string and other acoustic instruments. The RK279 is supplied with  
a shock mount, clip, expansion mount, additional bushings, cloth  
mounting adapter, and two cable clips. The shock mount and clip  
are used together for sound hole or other edge mounting. The  
shock mount and expansion mount are used together for string  
hole mounting. The cloth adapter is used for string mounting, and  
the cable clips are used to secure the microphone cable. The  
RK279 is also supplied with a carrying/storage pouch.  
5. Snap the microphone into the shock mount (see Figure 2).  
Note that the microphone can be swiveled in the shock mount  
after installation.  
Cloth Mounting Adapter  
1. Mount the SM11 on a violin, viola or cello using the cloth  
mounting adapter by pulling the “loop” strip away from the  
“hook” strip.  
2. Fasten the adapter (with the elastic microphone band upward)  
around the instrument strings between the bridge and tailpiece  
by pressing the “loop” and “hook” strips together.  
3. Insert the SM11 in the elastic band with the microphone grille  
toward the bridge (see Figure 3).  
VIOLINS, VIOLAS AND CELLOS  
To mount the SM11 on a violin, viola or cello, proceed as follows.  
Expansion Mount  
1. Slide the shock mount on the expansion mount blade (see  
Figure 1).  
2. Unscrew the knurled nut on the expansion mount until tension  
is removed from the rubber bushing below the nut.  
3. Insert the screw head and bushing end of the expansion  
mount in one of the string holes of the tailpiece. Note that a  
total of three different bushing sizes (4, 4.37 and 6 mm, or  
0.16, 0.17 and 0.24 in. diameter are supplied. If the 4 mm  
bushing installed on the expansion mount is too small,  
unscrew the knurled nut and replace the bushing with one of a  
larger diameter).  
4. Swivel the expansion mount to the approximate desired posi-  
tion and tighten the knurled nut to expand the rubber bushing  
in the string hole.  
VIOLIN MOUNTING–EXPANSION MOUNT  
FIGURE 2  
CLOTH  
CABLE  
CLIPS  
MOUNTING  
ADAPTER  
EXTRA  
BUSHINGS  
CLIP  
EXPANSION  
MOUNT  
SHOCK  
MOUNT  
SUPPLIED ACCESSORIES  
VIOLIN MOUNTING–CLOTH MOUNTING ADAPTER  
FIGURE 1  
FIGURE 3  
©2005, Shure Incorporated  
27B2568 (Rev. 6)  
Printed in U.S.A.  
 

Sennheiser Headphones RS 4 User Manual
Sennheiser Switch HDI 302 User Manual
Sharp Printer Network Scanner User Manual
Shure Hearing Aid 27EU3222B User Manual
Silvercrest Clock Radio KH 2281 User Manual
Soleus Air Heat Pump PH4 13R 01 User Manual
Sony Camcorder Accessories SPK PC User Manual
Sony Camcorder NEX VG10E User Manual
Spirit Treadmill Z300 User Manual
Sylvania TV DVD Combo 6620LDG User Manual