Shure Headphones SE846 User Manual

SE846  
SOUND ISOLATING  
EARPHONES  
TM  
Português  
Pусский  
INSTRUCTION MANUAL  
 
SE846  
Sound Isolating™ Earphones  
Wearing the Earphones  
Shure Sound Isolating™ Earphones, built with balanced armature speakers,  
deliver a detailed soundstage free from outside noise. The powerful and stylish  
Shure SE earphones come with a detachable cable, adapters, a durable carry-  
ing case, and interchangeable Sound Isolating sleeves for a comfortable and  
personalized fit.  
Wear them like earplugs. A good  
acoustic seal provides maximum bass.  
Important: If there seems to be a lack  
of low frequency response (bass), this  
means that the earphone sleeve is not  
forming a tight seal. Gently push the  
earphone deeper into the ear canal or  
try a different sleeve.  
1. Select a sleeve.  
2. Twist and pull to remove. Push new  
sleeve on fully. Compress foam  
sleeve slightly.  
Warning: Do not push the earphone  
sleeve beyond the ear canal opening.  
3. Insert firmly into ear. Wear cable  
over and behind ear. Tighten the  
cable and take up slack by raising  
the cable cinch.  
Choosing a Sleeve  
Select an earphone sleeve that provides the best fit and sound isolation. It  
should be easy to insert, fit comfortably, and easy to remove.  
Wearing the cable over the ear and  
securing it behind the head can help  
keep the earphones in place during  
physical activity.  
Soft Flex Sleeves: In small, medium, and  
large sizes. Made from pliable rubber.  
Changing Sleeves  
Twist and pull to remove the sleeve  
from the nozzle.  
Caution: If the barb or any of the  
Soft Foam Sleeves: Compress the foam  
sleeve between your fingers and insert  
into the ear canal. Hold in place for about  
ten seconds while the foam expands.  
nozzle is exposed, the sleeve is not  
properly installed. Replace sleeves if  
they do not tightly grip the nozzle. To  
ensure proper fit and performance, use  
only sleeves supplied by Shure (unless  
using custom molded sleeves).  
Slide on a new sleeve so that it  
completely covers the barb and the  
nozzle.  
Triple-Flange Sleeves: If desired, use  
scissors to trim the stem on the sleeve.  
©2015 Shure Incorporated  
27EU23776 (Rev. 2)  
Printed in China  
3
 
Removing the Earphones  
Maintenance and Cleaning  
Grasp the body of earphone  
and gently twist to remove.  
Note: Do not pull on cable to  
remove earphone.  
Careful maintenance ensures a tight seal be-  
tween the sleeve and nozzle, improving sound  
quality and product safety.  
Wipe the earphones and sleeves with mild  
antiseptic to avoid infections. Do not use  
alcohol-based disinfectants.  
Keep the earphones and sleeves as clean  
and dry as possible.  
Do not expose earphones to extreme  
temperatures.  
To clean sleeves, remove them from  
earphones, gently rinse in warm water and  
air dry. Foam sleeves require a longer drying  
time. Inspect for damage and replace if  
necessary. Ear sleeves must be completely  
dry before reusing.  
Replace sleeves if they do not fit properly.  
Do not attempt to modify this product. Doing  
so will void the warranty and could result in  
personal injury and/or product failure.  
Detachable Cable  
Cleaning the Nozzle  
If you notice a change in sound quality, remove  
the sleeve and check the nozzle of your ear-  
phone. If nozzle is blocked, clear obstructions.  
You may need to detach the  
cable from the earphones to at-  
tach optional components or to  
replace the cable if it becomes  
damaged. To prevent acciden-  
tal separation, the connector  
has a snug fit. Take special  
care to prevent damage to the  
earphone and connector.  
Pull straight apart—do not  
twist. Cable is a snap fit,  
not threaded.  
When reattaching the  
cable, match the "L" and  
"R" markings. For clear  
cables and earphones,  
match the color dots  
Caution: When cleaning, do not force any object  
through the earphone nozzle! This will damage  
the earphone sound filter.  
Note: If you pull at an  
angle, the connector will  
not detach.  
If no obstruction is found or if sound quality  
does not improve, replace the sleeve with a new  
sleeve or disassemble the nozzle to clean inside.  
(Red=Right, Blue=Left).  
Do not pull on the cable  
or put any pressure on the  
earphone nozzle.  
Do not use pliers or other  
tools.  
Listen for a click when  
connecting.  
Grasp the connector and  
the earphone as close as  
possible to where they join.  
4
 
2. Insert the nozzle into the earphone, aligning the dots so it  
matches the keyed opening.  
Key  
Interchangeable Nozzle Insert  
Three varieties of nozzle insert provide customizable frequency  
responses for a personalized listening experience. Use these in-  
structions to replace or clean the nozzle insert.  
Nozzle  
insert  
Nozzle Inserts  
Nozzle  
Color  
Sound  
Response  
Signature  
Blue  
Balanced  
Bright  
Neutral (as shipped)  
+2.5dB, 1kHz to 8kHz  
−2.5dB,ꢀ1kHzꢀtoꢀ8kHz  
3. Place the threaded collar over the nozzle. After ensuring the  
threads are properly engaged, use the nozzle key to gently turn  
clockwise.  
White  
Black  
Threaded  
Warm  
collar  
Caution: There should be no resistance to turning the collar  
until fully threaded into the housing. Check the following:  
The insert is fully seated in the nozzle.  
Removing the Nozzle  
Reassembling the Nozzle  
The nozzle is properly seated in the housing (dots  
aligned).  
Note: The nozzle contains small parts. Choose a proper work  
surface before disassembly.  
1. Gently slide the insert into the nozzle.  
Important: The insert needs to be fully seated. Reposition until  
it slides in easily. Do not force.  
4. Once you are certain that the nozzle is properly seated and the  
collar threaded all the way into the earphone housing, use the  
key to tighten the collar just enough to ensure it will not loosen  
during normal earphone usage.  
1. Place the nozzle key (included with earphones) over the  
nozzle.  
Correct  
2. Turn the key counter-clockwise to loosen and remove the  
threaded collar.  
3. Pull gently on the nozzle with your fingers to remove.  
Incorrect  
4. Using your fingers only, grasp the end of the nozzle insert and  
gently slide it out.  
Caution: Do not use any tools or your teeth as this could cause  
damage to the nozzle insert.  
5
 
Airline Adapter  
Specifications  
Certifications  
The airline adapter accessory is a dual-mono adapter plug for  
compatibility with the in-seat entertainment systems on certain  
international airlines.  
This product meets the Essential Requirements of all relevant  
European directives and is eligible for CE marking.  
Frequency Range  
15 Hz–20 kHz  
The CE Declaration of Conformity can be obtained from: www.  
shure.com/europe/compliance  
Sensitivity  
at 1 kHz  
114 dB SPL/mW  
Authorized European representative:  
Shure Europe GmbH  
Inline Attenuator  
Impedance  
at 1 kHz  
The sensitivity of Shure earphones increase the volume level of  
noise and audio equally. If the volume is turned down, the noise  
still remains at the same level. The EA650 attenuator will reduce  
the overall level of the music and noise at the same rate, still keep-  
ing the music far above the noise.  
Headquarters Europe, Middle East & Africa  
Department: EMEA Approval  
Jakob-Dieffenbacher-Str. 12  
75031 Eppingen, Germany  
Phone: 49-7262-92 49 0  
9ꢀΩ  
Noise Attenuation  
up to37 dB  
Fax: 49-7262-92 49 11 4  
Included Accessories  
Road Case  
Crush and water resistant road case  
Fit Kit with assorted sleeves  
Zippered carrying case  
Use the included water resistant, crush resistant road case to store  
and transport your earphones.  
Precaution During Air Travel:  
Pressure changes during air travel can create a vacuum seal  
of the case which may make it difficult to open. If this occurs,  
gently pry the case open using a coin or other flat surface.  
64-inch and 46-inch detachable cables  
Airline adapter  
To prevent this from occurring, place the attached carrying cord  
inside the case before closing and leave the left clasp open.  
¼-inch (6.3 mm) adapter  
Inline Attenuator  
Cable clip  
Nozzle removal key  
Nozzle inserts for custom frequency response  
6
 
 
Europe, Middle East, Africa:  
PT. GOSHEN SWARA INDONESIA  
Kompleks Harco Mangga Dua Blok L No. 35 Jakarta Pusat  
I.16.GSI31.00501.0211  
 

Sierra Monitor Corporation Switch D M9BA User Manual
Sony Clock Radio 3 873 060 341 User Manual
Sony Computer Monitor pr960f User Manual
Sony Microcassette Recorder ICD SX User Manual
Sony Portable Media Storage SDX1 35C User Manual
Sprint Nextel Network Card EP68 00356A User Manual
Stiga Trimmer ST 1200 BAT User Manual
Summit Electric Grill S 470 User Manual
Sunbeam Convection Oven CO3000 User Manual
Sylvania CD Player SRCD348 User Manual